Position :Home > PRODUCTS > Grinding equipment >

  • High pressure suspension mill
  • High pressure suspension mill
  • High pressure suspension mill
  • High pressure suspension mill
  • High pressure suspension mill

High pressure suspension mill

Feed size : <30mm

Capacity : 0.4-9.5t

Material : granite ,basalt,river stone,rock ,calsite ,limestone ,coal cinder,slag,shale,gangue,construction waste ,building debris

Application :  This stone mill is widely used in many industrial fields, such as building, chemical, chemical fertilizer, metallurgy, mining, nonmetal,abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. It can grind these materials which are 9 or less on the Meshesscale, and moisture is below 6%., and they should be non-explosive and non-flammable mining materials. The final size can be adjusted from 30 to 400 meshes easily.There are thousands of materials our stone mill can grind. The typical materialsare cement (raw meal and cement clinker), quartz, feldspar, calcite, gypsum,limestone, dolomite, graphite, fluorite, aedelforsite, phosphate ore, fused calcium-magnesium phosphate, car amide, electrolytic manganese metal, ferromanganese,coal, gangue, slag, zirconium, steatite, granite, orthoclase, marble, barites,ceramics, glass, etc

Parameters

Model Piece of roller Size of the roller (mm) Size of the ring (mm) Feed size(mm) Fineness of powder (mm) Capacity (t/h) Motor power (kW) Weight (without motor)(t)
YGM65 3 Φ210×150 Φ650×150 ≤15 0.033-0.613 0.4-1.8 15 3.6
YGM75 3 Φ260×150 Φ780×150 ≤15 0.033-0.613 1-3 18.5 4.8
YGM85 3 Φ270×150 Φ830×150 ≤20 0.033-0.613 1.2-4 22 8
YGM95 4 Φ310×170 Φ950×170 ≤25 0.033-0.613 2.1-5.6 37 14
YGM130 5 Φ410×210 Φ1280×210 ≤30 0.033-0.613 2.5-9.5 75 24
 

Features

 1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.  
  2. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).  
  3. High Pressure Suspension Mill meets the requirement of national dust-dump standard.  
  4. The separator can be adjusted very easily.  
  5. The multi-class seals are adopted to keep the grinding equipment tightly closed.

Principle

 When entering grinding chamber, the raw materials are shoveled up by the shovels and grinded between the rollers and ring; the materials after grinding are brought into the separator along with the air from the blower, and the qualified fine powder became final products and come into the cyclone powder collector, the other unqualified powder fall down to be re-grinded. The circular air returns back to the blower that the above process will be repeated, and the remaining air enters the bag filter in order to protect the environment.

©2014 Shanghai Pioneer Machinery Manufacturing Co., Ltd.