Position :Home > PRODUCTS > Grinding equipment >

  • HGM micro powder mill
  • HGM micro powder mill
  • HGM micro powder mill
  • HGM micro powder mill
  • HGM micro powder mill

HGM micro powder mill

Feed size : 10mm

Capacity : 400kg-6500kg

Material :  calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

Application : Stone Grinding Mill is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness

Parameters

table 1
Model HGM80 HGM100
Roller number 21 27
Ring Diameter (mm) Φ800 Φ1000
Ring number 1x3 1x3
Main unit speed(mm) 180-250 150-200
Max. feeding size(mm) 10 10
Final size (mesh) 325-2500 325-2500
Capacity (kg/h) 400-4500 900-6500
Overall dimension (m) 13.5×4×6.5 18x4.5x8.6
table 2
Name Item Unit Specifications & Technical Data
HGM80 HGM100
Motor for main frame Model   Y2-250M-4 Y2-315M-6
Power kW 55 110
Motor for separator Model   Y2-180M-4 Y2-200M-4
Power kW 18.5 30
Motor for Elevator Model   Y100L-4 Y112M-4
Power kW 3 3
Motor for Blower Model   Y2-255M-2 Y2-280M-2
Power kW 45 75
Motor for Hammer Crusher Model   PC400x300 PC600x400
Power Kw 11 18.5
Motor of Vibrating Feeder Model   GZ1F GZ1F
Power Kw 0.06 0.06
Motor of discharge valve Model   ZJD200 ZJD200
Power Kw 0.75 0.75
Impulse bag filter Model   DMC120 DMC184
Power   7.5  
 

Features

 Three-Ring & Medium-Speed MicroPowder Mill has high efficiency and low cost. Its capacity is raised by 40% compared with airflow mill and mix mill on the condition that the materials, the drive and the fineness of the final powder are the same. The life span of tear & wear parts is more than that of straight impact crusher and turbine mill under the circumstance of same materials and fineness of the final powder. Usually, its life span is more than one year. There is no rolling bearing and screw in the grinding cavity, so as to avoid the damage to the machine caused by tear & wear of bearing and seals and the looseness of screws. The fineness of powder can reach ≦5μm with d97 once.

Principle

 The motor drives the main shaft and every turnplate through the reducer. The reducer drives dozens of rollers to rotate against race way of ring through pin. Small material crushed by hammer crusher is transported into hopper by elevator, and then vibrating feeder shall feed material to the central part of upper turnplate evenly. The material falls to circle under the centrifugal force and comes down to raceway of ring to be crushed into powder. After grinded in the first race way, the material goes to the second and third turnplate. The blower inhales the external air into the mill and carries the powder after third turnplate into powder-separator. Turbine in the separator makes the coarse powder drop down and regrinded and the fine powder shall go into cyclone powder collector together with air current and go down through discharge valve as final product; at the same time, air current with a little dust goes out through blower and muffler after purified by filter.

©2014 Shanghai Pioneer Machinery Manufacturing Co., Ltd.