Position :Home > PRODUCTS > Grinding equipment >

  • Raymond mill
  • Raymond mill
  • Raymond mill
  • Raymond mill
  • Raymond mill

Raymond mill

Feed size : 10-35mm

Capacity : 1-20t

Material : quartz, feldspar, barite, calcite carbonate, limestone, talc, ceramic, iron ore, carborundum, bauxite, rock phosphate, coal and other materials, total about 400 kinds of materials

Application :  This Raymond Mill is used to grind materials in the fields of metallurgy, building materials, chemical and mining industry.

Parameters

                                                                                        Technical Parameter
Type Roll Grinding 
Number
Maximum 
Feed Size
(mm)
Output Size
(mm)
Output of 
8 hours
Motor Power
(kw)
Blower Power
(kw)
Analysis Machine Power(kw) Overall 
Dimension 
(mm)
3R1510 3 10 80-325 0.3-1.2 7.5 5.5 1.1 3200*2100*4500
3R2115 3 >20 80-325 0.4-1.6 15 11 >2.2 4100*3300*4500
3R2615 3 20 80-325 0.5-2.7 18.5 15 2.2 4300*3500*5100
3R2715 3 20 80-325 0.7-3 22 18.5 2.2 5300*4100*5200
4R3016 4 20 80-325 0.8-5 30 30 2.2 5300*4100*5200
4R3015 4 25 80-325 1.0-4 30 22 2.2 5500*4300*5400
4R3216 4 25 80-325 1.0-8 45 30 5.5 7100*5900*7900
4R3220 4 28 80-400 1-10 45 37 5.5 8000*6000*9500
5R4119 5 30 80-400 5-10 75 75 7.5 9200*7250*9700
6R4427 6 35 80-400 9-15 132 132 11 12550*5700*8355
 

Features

 1. The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system.  
  2. Compared with other milling plants, its passing ratio achieves 99%, this is what other mill can not reach.  
  3. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.  
  4. Main parts of the whole plant are made from cast and steel of high quality. The technics is so subtly that insures the durability of whole plant. 5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.

Principle

  Firstly, raw material is crushed by jaw crusher to the size required, then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder, evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind.  
  After this, the ground stuff are carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The set’s airflow system is closely sealed up and circulated under condition of negative and positive pressure

©2014 Shanghai Pioneer Machinery Manufacturing Co., Ltd.