Position :Home > PRODUCTS > Crushing equipment >

  • Jaw crusher
  • Jaw crusher
  • Jaw crusher
  • Jaw crusher
  • Jaw crusher

Jaw crusher

Feed size : 10-225mm

Capacity : 1-800t/h

Material : Crushing, breaking or crushing limestone, coal, calcium carbide, quartz, dolomite, sulfide ore, gypsum and chemical raw materials, such as the following hard-brittle materials

Application : The crusher is widely used in mining, metallurgy, chemical industry, building material, highway, railway, water conservancy and other industries.

Parameters

Model Feed size(mm) Max feed size(mm) Adjustment range(mm) Yield(t/h) Power(KW) Weight(t) Dimensions(L x W x H) (mm)
PE-150 150×250 125 15-45 1.2-3.5 5.5 0.8 950x1100x1100
PE-250 250×400 210 20-60 5-22 15 2.8 1450x1350x1500
PE-400 400×600 350 40-80 18-60 30 7 1700x1800x1650
PE-500 500×750 425 50-100 43-102 55 10.6 2270x2370x2145
PE-600 600×900 500 65-160 51-180 75 16.5 3000x2500x2600
PE-750 750×1060 630 80-180 80-195 110 29 2526x2410x2780
PE-900 900×1200 780 95-180 140-270 132 52 2960x2760x3530
PE-1000 1000×1200 850 195-280 190-310 132 55 3889x2826x3025
PE-1200 1200×1500 1020 150-300 260-510 180 100.9 4930x3548x3702
PEX-150 150×750 120 18-40 8.5-28 15 3.8 1300x1750x1200
PEX-250 250×750 210 25-60 15-35 30 5.5 1400x1750x1400
PEX-250 250×1000 210 25-60 20-65 30 7 1400x1980x1440
PEX-250 250×1200 210 25-60 25-75 45 8.5 1400x2180x1440
PEX-300 300×1300 250 20-90 30-105 75 11 1560x2350x1600

Features

1.  Large crushing ratio and even discharged materials.
2.  Large and reliable adjusting range of discharged outlet meets various requirements.
3.  Safe and reliable lubrication system, easily changed spare parts and easy maintenance.
4.  Simple structure and low operation cost.
5.  Low noise and little dust pollution. 

Principle

Motor drives V-belt and belt pulley to make moving jaw do periodic motion by eccentric shaft.  Moving jaw moves upwards to the fixed jaw when angle between toggle plate and moving jaw increases, so materials are crushed in this process.  Moving jaw moves downwards from fixed jaw by pulling rod and spring when angle between toggle plate and moving jaw decreases, so the final crushed materials are discharged from the outlet.  The moving jaw moves periodically according to the eccentric shaft movement, and the materials entering the crushing chamber are crushed and discharged continually.

©2014 Shanghai Pioneer Machinery Manufacturing Co., Ltd.